Model 2001 High-Performance, 7-1/2-Digit DMM w/ 8k Memory
- Manual
- Model 2001 Multimeter Quick Reference Guide Rev. B
- Model 2001 Multimeter Calibration Manual Rev. G
- Model 2001 Multimeter Repair Manual Rev. B
- Model 2001 Multimeter Operator's Manual Rev. J
- Model 2001 Multimeter Japanese User's Manual Rev. A (6.2MB)
- Model 2001-TCSCAN Scanner Card Instruction Manual Rev. B
- Model 2001-SCAN Scanner Card Instruction Manual Rev. C
- Firmware Upgrade for Model 2001-M Release Notes Rev. A
- Model 2001 Multimeter and Model 7001/7002 Switch System Support Software Rev. A
- Model 8610 Low Thermal Shorting Plug
- Application Note
- #601 Peak Detection with the Model 2001 DMM
- Displaying the Windows of the 2001
- #1138 Switching in Multipoint Testing
- #810 Optimizing Switch/Read Rates with Series 2000 DMMs and 7001/7002 Switch Systems
- Quick Reference Guide to SCPI Commands
- #806 Production Testing of Thermistors Using the 2400 Digital SourceMeter
- Eliminating Common SCPI Errors
- How to Program an Instrument to Assert SRQ on the GPIB Bus
- FAQ
- What is the difference between the FULL and COMPACT Buffer Data Groups in the 2001 or 2002 DMM?
- Can the 2001-TCSCAN be used with signals other than thermocouples?
- Scan: Can the 2001-TCSCAN be used with the Model 2000?
- Troubleshooting: How do you compensate for variances in environmental temperature?
- Amps: What is the best instrument for measuring currents at high amperage rates?
- Temperature: What is the best way to measure temperature from thermocouples for a control loop?
- Remote Operation: Can I rearrange the order in which my instrument sends back data?
- Volts: Why do I have an offset in AC Volts with a short applied?
- Specs: What is Crest Factor?
- Specs: How do I apply the temperature coefficient specification?
- Specs: What is pumpout current and when might it pose a problem for my measurements?
- Ohms: What is the difference between 2-wire and 4-wire ohms measurements?
- Remote Operation: If using math functions, can I also get the raw data?
- Specs: How does an Electrometer differ from a Digital MultiMeter (DMM) ?
- Ohms: How is resistance measured?
- Specs: What is Offset Compensation?
- Specs: How Can I Apply an Accuracy Specification on a Data Sheet to my Specific Measurement?
- Remote Operation: What do I need to communicate with an instrument from a PC?
- Ohms: How do you decide whether to use a two-probe method or a four-probe method for resistance?
- Specs: What is CMRR (Common Mode Rejection Ratio)?
- Troubleshooting: How do I limit ground loops?
- Specs: What are the effects on accuracy due to possible deterioration within calibration periods?
- Speed: What is NPLC?
- Specification
- Model 2001-SCAN Scanner Option Specifications Rev. B
- Model 2001 Multimeter Specifications
- Model 2000 6 1/2-Digit Multimeter Specifications
- Data Sheet
- Model 2001 7-1/2 Digit and Model 2002 8-1/2 Digit High Performance Multimeters
- High Impedance Semiconductor Resistivity and Hall Effect Test Configurations
- Model 2000 6-1/2-Digit Multimeter
- Technical Information - Digital Multimeters
- 2013 Bench Products Test and Measurement Solutions
- Article
- Choosing DMMs and More for High Performance Applications
- Problem: Errors in Low Resistance Measurements
- Problem: Noisy Readings in Low Resistance Measurements
- Problem: Reading Drift in Low Resistance Measurements
- How to Select the Right Temperature Sensor
- Problem: Measurements are Low in High Resistance Measurements
- Problem: Noisy Readings in High Resistance Measurements
- Problem: Error in Low Voltage, Low Current Measurements
- Brochure
- Series 2000 High-Performance Digital Multimeters
- E-Guide: High Performance DMMs for Single- and Multi-Channel Applications
- Your Guide to Creating High Performance Switching Applications
- E-Handbook Guide to Switch Considerations by Signal Type
- E-Handbook to Understanding Electrical Test and Measurement
- Selector Guide
- Digital Multimeters Selector Guide
- Keithley alternatives for discontinued Keithley 580 micro-ohmmeter
- Data Acquisition Accessories Selector Guide
- Data Acquisition Accessories Selector Guide
- White Paper
- Getting Back to the Basics of Electrical Measurements