- DOCUMENTS
- Application Note
- Article
- Brochure
- Data Sheet
- FAQ
- Manual
- Selector Guide
- Specification
- White Paper
- Application Note
- Network Primer/Programming Tutorial for the Model 2701 Ethernet-Based DMM/Data Acquisition System
- How to control multiple Integra Series Products with ExceLINX-1A
- #2875 Converting a Series 2700 SCPI Application to a Series 3700 System Switch/Multimeter System Script Application
- #2208 Solutions for Production Testing of Connectors
- Article
- Exploring LXI's Advanced Capabilities
- Resistive Temperature Detectors: Thermocouple Alternative for Precise, Repeatable Temp. Measurements
- Synchrotron High Speed Magnetics Monitoring
- RF/Microwave Switching Systems Subtleties: Achieving the Performance You Need
- Brochure
- Integra Series - Model 2701 Ethernet-based Multimeter/Data Acquisition System
- Integra Series Integrated Multimeter/Data Acquisition Systems Brochure
- Solutions for Educational Labs and University-Based Researchers
- E-Handbook to Understanding Electrical Test and Measurement
- E-Guide: High Performance DMMs for Single- and Multi-Channel Applications
- Your Guide to Creating High Performance Switching Applications
- E-Handbook Guide to Switch Considerations by Signal Type
- Data Sheet
- Free Bundled Software for the Integra Series (Models 2700, 2701, and 2750)
- ExceLINX-1A Excel Add-In for Integra Series (Models 2700, 2701, and 2750)
- Integra Series Technical Data Sheet
- Models 2700, 2701, 2750 Multimeter/Data Acquisition/Switch Systems
- 2013 Bench Products Test and Measurement Solutions
- FAQ
- How can I configure the 2701 for maximum speed from the front panel controls?
- What Port Number does the 2701 use to communicate over Ethernet?
- How many programs can access the 2701 at the same time?
- How do I close the port on the 2701 to enable me to communicate again after a dropped connection?
- Can I use VISA to program the 2701 over ethernet (TCP/IP)?
- In order to configure my 2701, How can I display my network settings for my computer?
- What are possible reasons that I cannot connect to the internal web page of the 2701?
- Why does my VISA based connection to the 2701 Ethernet Connection Execute so slowly?
- Can I use the 2701 in an operating system other than Windows such as Linux, Unix or DOS?
- Can I communicate with a secondary RS-232 device through the 2701/Ethernet connection?
- TestPoint's TCP/IP object does not close the connection to the 2701, how do I fix it?
- Can I use the 2701 Ethernet connection from TestPoint?
- Specs: What Firmware Version Does My 27xx Require to Use a 77xx Module?
- Temperature: Can I use three wire RTD sensor with Integra Series?
- IVI: Can I use Keithley Integra series IVI drivers with LabVIEW 7.0 (LV)?
- Specs: Comparing the Reading Rates of Integra Mainframes
- Specs: Benchmarking the Reading Rate of an Integra Mainframe: Model 2700, 2701 or 2750
- Application Examples for Integra: 2700, 2701, 2750
- Specs: What is the Auto Scan feature of the Integra Series?
- Remote Operation: What SCPI Commands Maximize the Measurement Speed of my Integra Mainframe?
- Difference between Timer and Delay in the trigger model of Integra series products, (2700, 2701, 2750, ExceLinx).
- Modules: Are mating connectors supplied with the switching modules that have 'D-sub' connectors?
- Modules: What are my connectivity options for the 770x Modules that terminate in DB-50 or DB25?
- ExceLINX: Which Integra Series Modules are supported by ExceLINX-1A?
- ExceLINX: Why does ExceLINX periodically freeze up if Excel's AutoSave add-in is enabled?
- ExceLINX: Why Isn't ExceLINX Available from all User Profies?
- ExceLINX: Why does ExceLINX or my IVI Driver Installation Hang at the 'Copying VISA Runtime' Dialog?
- Temperature: What is the best way to measure temperature from thermocouples for a control loop?
- Remote Operation: Which plug-in modules are supported by the TestPoint runtime start-up software?
- Specs: How are maximum input voltage and common mode voltage related on a 77xx module?
- Remote Operation: Can I rearrange the order in which my instrument sends back data?
- Volts: Why do I have an offset in AC Volts with a short applied?
- Specs: What is Crest Factor?
- Specs: How do I apply the temperature coefficient specification?
- Specs: What is pumpout current and when might it pose a problem for my measurements?
- Ohms: What is the difference between 2-wire and 4-wire ohms measurements?
- Remote Operation: If using math functions, can I also get the raw data?
- Specs: How does an Electrometer differ from a Digital MultiMeter (DMM) ?
- Ohms: How is resistance measured?
- Specs: How Can I Apply an Accuracy Specification on a Data Sheet to my Specific Measurement?
- Speed: What is NPLC?
- ExceLINX: What are the differences in the various ExceLINX products?
- Manual
- Model 2701 Ethernet-Based DMM / Data Acquisition System Service Manual Rev. A
- Model 2701Ethernet-Based Multimeter/Data Acquisition System Packing List PA-854 Rev. A
- Model 2701 Instrument Networking Instruction Manual Rev. B
- Model 2701 Ethernet-Based DMM/Data Acquisition System User's Manual
- Model 27xx (Models 2700, 2701, and 2750) Japanese User's Quick Reference Manual Rev. A
- Model 2700/27XX Integra Series Quick Start Guide
- Software Options for the Models 2700, 2701 and 2750
- A recorded tutorial, How to Use ExceLINX-1A for Integra products
- Network Connection Tutorial for Ethernet Based Instruments
- Selector Guide
- Digital Multimeters Selector Guide
- Model 2700/2701/2750 Series/Integra Series Modules Selector Guide
- Specification
- Model 2701 Ethernet Multimeter/Data Acquisition System
- White Paper
- Instrument-Grade DAQ via Ethernet
- Instrument-Grade Data Acquisition with Ethernet Brings Precision Measurement and Control to Networks
- Making AST/Burn-in Testing More Productive with Ethernet-based Instruments
- Fundamentals of HALT/HASS Testing
- New Test Realities for Evolving FPD Technologies